Basic Info.
Transport Package
Nuded Cargo or Nylon Bags or Wooden Box
Specification
complete in specifications
Product Description
carbon steel capThe temperature of carbon steel cap in production has a certain influence on the quality of the head. The atmosphere in the heating furnace is neutral or weak oxidation. The heated flame should not be directly touched with the workpiece. When forming some heads, the heating temperature should not exceed 420 ºC generally, and when the temperature of the type parts drops below 300 ºC, it is not suitable for continuous hot forming.The carbon steel cap shall be hot formed as far as possible, such as the forming temperature is about 300 ºC - 400 ºC. The heating temperature of the workpiece can be raised to about 650 ºC, but it should not exceed 800 ºC, and the temperature of the hot correction after cold forming is 100-350 ºC. When the hot forming temperature is above 600 ºC, the high temperature resistant coating or other protective methods shall be selected for the task surface to avoid surface oxidation pollution; when the hot forming temperature is 500-600 ºC, the carbon steel head manufacturer shall determine whether the surface high temperature protection can be required according to the situation, and if necessary, the margin for removing the surface oxidation layer of the head shall be reserved.It is difficult to define the effect of temperature on carbon steel head. Only the producer can better judge the effect of temperature on the head. Therefore, if we want to produce good quality products in production, we need to improve the overall level of its processing technology, and also improve its mastery.Generally, two methods of molding and spinning are used for processing. The bottom flatness of the molded flat bottom head is high, the blanking size is large, and the cost is high, so it is suitable for the equipment with higher requirements. However, the bottom flat bottom of the fabricated flat bottom head is slightly worse, the blanking size is slightly smaller, and the cost is low, but it does not affect the use of general equipment. The features of the spinning head are as follows: a large workpiece can be formed with a small deformation force; the equipment is relatively simple; small and medium-sized sheet metal can be spun with a lathe; the die is simple, only one core die is needed, and the material requirements are low.BUTT-WELDING PIPE FITTINGS DETAILS
MATERIAL
| Carbon Steel : ASTM, A234WPB, A234WPC, A420WPL6 ,Q235,10#, A3, Q235A, 20G,16Mn, DIN St37, St45.8, St52.4,St.35.8,St.35.8. |
Stainless Steel: lCrl8Ni9Ti 0Crl8Ni9 00Crl9Nil0 0Crl7Nil2Mo2Ti 30Crl7Nil4Mo2 304 304L 316 316L |
Alloy Steel: 16Mn Cr5Mo 12CrlMoV 10CrMo910 15CrMo 12Cr2Mol, A335P22 St45.8, ASTM A860 WPHY X42 X52 X60 X70 |
STANDAR/ | ASTM / JIS / DIN / BS / GB/GOST |
MODEL | 1 .Tee(Straight and Reducing) 2.180 DEG Return- Elbow (45/90/180 DEG)
- Cap
5. Reducer(Concentric and Eccentric) |
TYPE | Seam Or Seamless |
ELBOW GEGREE | 45 degree, 90 degree, 180 degree |
SURFACE | Black Paint, Anti Rust Oil, Hot-Dipped Galvanize |
WALL THICKNESS | SCH5S,SCH10S,SCH10,SCH20,SCH30,SCH40,STD,XS,SCH60, SCH80,SCH100,SCH120,SCH140,SCH160,XXS,2MM |
SIZE | 1/2"-48"(Dnl5-Dnl200) |
CONNECTION | Welding |
SHAPE | Equal, Reducing |
CERTIFICATE CERTIFICATE | ISO9001 |
APPLICATION | Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc |
RELATED PRODUCTS | 1. Carbon steel nipples and sockets 2. Flanges 3. Malleable iron pipe fittings 4. Pipes 5. High-pressure fittings 6. Valves 7. P.T.F.E .thread seal tape 8. Brass fittings 9.Ductile iron pipe fittings 10. Copper fittings 11. Sanitary fittings, etc,. 12. Grooved fittings |
Customers' drawings or designs are available. |
PACKAGE | 1>1/2" - 2" in cartons 2>Above 2" in wooden cases. Big size is workable by pallets. |
DELIVERY DETAILS | According to the quantities and specifications of each order. formal delivery time is from 30 to 45 days after receiving the deposit. |
Pipe fitting processTransaction process
Packaging
Address:
38F, No. 88Yincheng Road Pudong District, Shanghai, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Our company supplies different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.